PW-8901; джерело живлення шини VM та VIO від 24 V DC
- Під замовлення
- Код: TXN 189 01
Відправка з 04 липня 2026Ціну уточнюйте
Мінімальна сума замовлення на сайті — 200 ₴
+380 (68) 854-55-57
Павлоповернення товару протягом 14 днів за домовленістю
PW-8901; джерело живлення шини VM та VIO від 24 V DC
Ціну уточнюйте
Під замовленняОпис
Характеристики
Інформація для замовлення
The PW-8901 is a power supply module in a 24 mm wide housing that generates two power supply voltages on the TC800 system bus from the 24 V DC network: VM for powering the internal circuits of the modules and VIO for powering the input circuits of selected modules. At the same time, it enables the connection of multiple frames via the TCL3 system bus. The connectors are screwless.
| DI | |
| DI/AI | |
| DO | |
| AI | |
| AO | |
| COM | |
| SENSOR |
| Power supply | |
|---|---|
| Nominal supply voltage (V) | The bus part is passive and serves to distribute the 24 V DC power supply for the system and separately for the I/O part of the installed modules. |
| Operating conditions, product standards | |
| Product standard | ČSN EN 61131-2:2008 (idt IEC 61131-2:2007) - Programmable control units |
| Protection class of electrical object | II, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016) |
| IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989) | IP20 |
| Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
| Degree of pollution | 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007) |
| Overvoltage category installation | II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007) |
| Type of device | Built-in |
| Working position | Vertical |
| Type of operation (operating frequency) | Continuous |
| Ambient operating temperatures | -20 °C to + 55 °C |
| Operating relative humidity | from 10 % up to 95 % without condensation |
| Operating atmospheric pressure | min. 70 kPa (<3,000 m above sea level) |
| Storage temperatures | –25 °C to +70 °C |
| Storage relative humidity | Max. 80% without vapor condensation |
| Storage environment | Dry, clean areas without conductive dust, aggressive gases or acid vapors for a period not exceeding the warranty period. |
| Transport temperatures | -25°C to -70°C |
| Transport environment | Covered means of transport, transport packaging must not be exposed to the effects of rain and snow |
| Electromagnetic compatibility, Mechanical endurance | |
| Electromagnetic compatibility / Emission | A, according to EN 55032 ed. 2: 2017 (idt CISPR 32: 2015) |
| Sinusoidal vibration endurance | 10 Hz to 57 Hz amplitude 0.075 mm, 57 Hz to 150 Hz acceleration 1 G, according to Fc according to ČSN EN 60068-2-6 ed.2:2008 (idt IEC 60068-2-6:2007), 10 cycles in each axis . |
| Packaginng, transportation, storage | |
| Description | The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C |
| Installation | |
| Assembly description | The frame contains the system bus in an open design without connectors and is supplied in five dimensional variants. It is inserted into the DIN rail and secured using handles on both ends of the frame. The individual modules can then be mounted on the bus in any location with the exception of the frame mounting area. The modules are mechanically fixed to the DIN rail using latches integrated into the housing of each module. Covering the unoccupied part of the bus Covers are available for covering the unoccupied part of the bus on the frame (covering the freely accessible electrical part of the bus), which are supplied in a combined set of 8 pieces with a cover width of 10 mm (Fig. 2.4). The required number of covers is broken off and snapped onto the DIN rail via the covered bus. The kit order number is TXN 189 60. |
| Module operation | |
| Module configuration | The bus part does not require any configuration or setup |
| Commissioning | The bus part does not require any additional steps for commissioning |
| Maintenance | |
| Description | The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected. |
| Warranty | |
| Generally | Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s. |
| Notice | You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change. |
| Основні | |
|---|---|
| Виробник | Teco |
| Країна виробник | Чехія |
| Стан | Новий |
- Ціна: Ціну уточнюйте