CP-2061 CPU/1core, 1xETH100/10, NFC, 2xRS-485, 4x AI/DI, 4x RO, 3x AO/PWM, 1xCIB
- Під замовлення
- Код: TXN 120 61.02NNNN
Відправка з 04 липня 2026Ціну уточнюйте
Мінімальна сума замовлення на сайті — 200 ₴
+380 (68) 854-55-57
Павлоповернення товару протягом 14 днів за домовленістю
CP-2061 CPU/1core, 1xETH100/10, NFC, 2xRS-485, 4x AI/DI, 4x RO, 3x AO/PWM, 1xCIB
Ціну уточнюйте
Під замовленняОпис
Характеристики
Інформація для замовлення
The CP-2061 is a second-generation Foxtrot base module, which is an optimal combination of a central unit with an integrated extended combination of 4 digital and analog inputs and 3 analog outputs, 3 transistor outputs or PWM, compact size occupying the width of 4 modules on a DIN rail. Two-wire CIB Common Installation Bus® (up to 32 addressable modules). It can therefore be expanded in the same way as other base modules. It is equipped with a total of 11 I/O: four multi-purpose inputs, each of which can be used as either analog or binary three analog outputs for proportional control of various connected devices. 4 independent relay outputs organized into two groups of two with their own common terminal Communication capabilities of the basic CP-2061 module: 1x Ethernet interface 100 Mbit/s, each with up to 32 simultaneous connections (programming and general IP communication) USB A for Flash memory, WiFi adapter (client and AP - Access point) etc. 2x serial interfaces RS-485 1x CIB interface NFC memory CP-2061 is equipped with a new powerful central unit (J series CPU) with memory 2 MB for the user program, 128 MB of internal disk for storing files with parallel access from LAN as a network disk, 16MB of fast RAM disk slot for microSD card up to 1 TB File management is provided by a journaling file system
| DI | |
| DI/AI | 4x DI/AI |
| DO | 4x RO, 3x DO/PWM/AO |
| AI | |
| AO | 3x AO/PWM/DO |
| COM | 1x ETH 10/100 2x Serial channel RS-485 1x USB host 1x CIB master |
| SENSOR |
| COM - Serial channels | |
|---|---|
| Number of internal RS-232 serial channels | 1 |
| Max. baud rate (RS-232) | 200 kBd |
| Receiver input resistance (RS-232) | min. 7 kOhm |
| Signal output level (RS-232) | typ. ±8 V |
| Max. length of connected line (RS-232) | 15 m |
| Power supply | |
| Supply voltage, tolerances | The submodule is powered from the power supply the terminal device in which it is installed. |
| Maximum power input | 1,2 W |
| Galvanic separation of power supply from internal circuits | No |
| Insulation voltage of galvanic separation | 1 000 VDC |
| Size and weight | |
| Weight approx. | 25 g |
| Product dimensions (width x height x depth) | 15,5 × 42 × 3,5 mm |
| Operating conditions, product standards | |
| Product standard | ČSN EN 61131-2:2008 (idt IEC 61131-2:2007) - Programmable control units |
| Protection class of electrical object | III, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016) |
| Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
| Degree of pollution | 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007) |
| Overvoltage category installation | II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007) |
| Type of device | Submodule |
| Type of operation (operating frequency) | Continuous |
| Ambient operating temperatures | -20 °C to + 55 °C |
| Operating temperature maximum (° C) | +55°C |
| Operating temperature minimum (° C) | -20°C |
| Operating relative humidity | from 10 % up to 95 % without condensation |
| Operating atmospheric pressure | min. 70 kPa (<3,000 m above sea level) |
| Storage temperatures | –25 °C to +70 °C |
| Installation | |
| Attention! | Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to touch the printed circuit boards directly without protective measures. |
| Connection | |
| Description | Terminal communication interfaces are typically equipped with connectors. The connection of the connectors is specified in the documentation of the respective system where the submodule is used. |
| Module operation | |
| Module configuration | Submodules with an RS-485 interface contain solder jumpers, which are used to connect a terminating resistor network. They are marked "BT1" for the first channel and "BT2" for the second channel. By default, submodules are shipped with jumpers disconnected. |
| Warranty | |
| Generally | Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s. |
| Warning | All conditions of this documentation must be met before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery of which the Foxtrot system is a part complies with the requirements of Directive 89/392 / EEC, in so far as it applies to them. Documentation subject to change. |
| Основні | |
|---|---|
| Виробник | Teco |
| Країна виробник | Чехія |
| Стан | Новий |
| Користувальницькі характеристики | |
| DI/AI | 4x DI/AI |
| DO | 4x RO, 3x DO/PWM/AO |
| AO | 3x AO/PWM/DO |
| COM | 1x ETH 10/100 2x Serial channel RS-485 1x USB host 1x CIB master |
- Ціна: Ціну уточнюйте