C-WG-0205S Модуль CIB для RFID, 2×AI/DI, 5×DO, 4×PWM
- Під замовлення
- Код: TXN 143 36
Відправка з 10 жовтня 2026Ціну уточнюйте
Мінімальна сума замовлення на сайті — 200 ₴
+380 (98) 363-64-36
повернення товару протягом 14 днів за домовленістю
C-WG-0205S Модуль CIB для RFID, 2×AI/DI, 5×DO, 4×PWM
Ціну уточнюйте
Під замовленняОпис
Характеристики
Інформація для замовлення
The module is intended for connecting the RFID reader SL031 (13.56MHz) with an integrated antenna for reading Mifare 1k, Mifare 4k, Mifare UltraLight and NFC NTAG203 tags. In addition to the signals for connecting the reader, the module contains 2 universal DI/AI inputs and 5 DO (4x PWM) outputs. DI/AI inputs can be set as binary potential-free or balanced EZS or as analog for measuring temperature or resistance. Resistance sensors PT1000, Ni1000, NTC12k thermistor sensor, or KTY81-121 are used for temperature measurement.
| DI | |
| DI/AI | 2x DI/AI (R, binary, balanced) |
| DO | 5x DO |
| AI | |
| AO | Power output 12V / 60mA |
| COM | 1x CIB |
| SENSOR |
| COM - System buses | |
|---|---|
| CIB - Common Installation Bus (R): Installation I/O bus | 1x CIB slave |
| DI - Parameters of binary inputs DC (group A) | |
| Parameters valid for inputs on the terminals | SYN - input and output terminal |
| Number of inputs in group | 1 |
| Galvanic separation of inputs from CIB bus | No |
| Max. measuring voltage on the connected contact | 3,3 V DC |
| Internal input resistance | 10 kΩ |
| DO - Parameters of binary transistor outputs (group A) | |
| Parameters valid for the terminals | DO |
| Number of transistor outputs | 1 |
| Output type | semiconductor output, half-bridge (push-pull) |
| Galvanic separation from internal circuits | No |
| Diagnostics | No |
| Output voltage | 5 V DC |
| Output current | 20 mA |
| Special functions (A) | PWM / data - format WS2812B |
| Power supply | |
| Supply voltage, tolerances | 24/27 V DC from CIB bus |
| Auxiliary power supply - voltage | The 5V terminal has an output of an integrated +5 V DC auxiliary power supply for powering the addressable WS2812B LED chips |
| Maximum power input | 5,2 W |
| Power supply from CIB - maximum current consumption (mA) | 210 mA |
| Power supply from CIB - Galvanic separation of power supply from internal circuits | No |
| Power supply from CIB - internal protection | Yes, returnable fuse |
| Size and weight | |
| Weight approx. | 30 g |
| Product dimensions (width x height x depth) | 50 x 50 x 30 mm |
| Operating conditions, product standards | |
| Product standard | ČSN EN 60730-1 ed. 2:2001 (mod IEC 60730-1:1999) |
| Protection class of electrical object | III, according to ČSN EN 61140: 2003 (idt IEC 61140: 2001) |
| IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989) | IP20 |
| Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
| Degree of pollution | 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007) |
| Overvoltage category installation | I, according to ČSN EN 60664-1 ed_2:2008 (idt IEC 60641-1:2007) |
| Type of device | In the installation box, under the cover |
| Working position | Any |
| Type of operation (operating frequency) | Continuous |
| Ambient operating temperatures | -10 °C to + 55 °C |
| Operating temperature maximum (° C) | +55°C |
| Operating temperature minimum (° C) | -10°C |
| Operating relative humidity | from 10 % up to 95 % without condensation |
| Operating atmospheric pressure | min. 70 kPa (<3,000 m above sea level) |
| Storage temperatures | –25 °C to +70 °C |
| Electromagnetic compatibility, Mechanical endurance | |
| Electromagnetic compatibility / Emission | ČSN EN 55022 ed2:2007 (mod CISPR22:2005) |
| Electromagnetic compatibility / Immunity | min. according to ČSN EN 60730-1 ed.2: 2001 |
| Sinusoidal vibration endurance | 10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.) |
| Installation | |
| Assembly description | The module C-DM-0001B-SL is mounted in arbitrary position into instalation box under a lid or under device located in box. Installation of this module is done as described in TXV 004 13 documentation. |
| Connection | |
| Connection of power and system communication | terminal block with screw terminal 1.5 mm2 |
| Connection of inputs / outputs | terminal block with screw terminal 1.5 mm2 |
| Module installation tools | (-) 3 mm, flat screwdriver |
| Module connection | The C-DM-0001B-SL module has a CIB bus, one DO output terminal (PWM) for LED control and one SYN (digital) synchronization I / O terminal for synchronization control of other C-DM-0001N-SL modules. The SYN terminal type is selected by software. The CIB bus master is a basic Foxtrot module or an external module, such as the CF-1141. The maximum number of modules on the line is limited by taking the module from the line. Further information can be found in the TXV 004 13 manual "Peripheral modules on the CIB bus". An example of the module connection is shown in the figure. The MICRO SD card is not part of the module. |
| Module operation | |
| Commissioning | The module is operated, set and diagnosed from the MOSAIC programming environment or other parameterization software. The module is ready for operation after connecting the supply voltage and the CIB bus. The HW address is indicated on the label on the module. |
| Module diagnostics | The basic diagnosis is done internally and the result is availablein the relevant registers of Mosaic. After power on light greenRUN LED, when communication is start it stay flashing. State ofrelay ON is indicate by lighting of appropriate green LED. |
| Maintenance | |
| Description | The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected. |
| Notice | Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!! |
| Warranty | |
| Generally | Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s. |
| Notice | You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change. |
| Основні атрибути | |
|---|---|
| Виробник | Teco |
| Країна виробник | Чехія |
| Стан | Новий |
| Користувальницькі характеристики | |
| DI/AI | 2x DI/AI (R, binary, balanced) |
| DO | 5x DO |
| AO | Power output 12V / 60mA |
| COM | 1x CIB |
- Ціна: Ціну уточнюйте