C-KY-0001R Клавіатура CIB, OLED-дисплей, сенсорні кнопки (16), зчитувач RFID-карток і міток
- Під замовлення
- Код: TXN 133 84
Відправка з 06 вересня 2026Ціну уточнюйте
Мінімальна сума замовлення на сайті — 200 ₴
+380 (98) 363-64-36
повернення товару протягом 14 днів за домовленістю
C-KY-0001R Клавіатура CIB, OLED-дисплей, сенсорні кнопки (16), зчитувач RFID-карток і міток
Ціну уточнюйте
Під замовленняОпис
Характеристики
Інформація для замовлення
C-KY-0001R is a universal wall controller on the CIB Common Installation Bus® with: - glass face, - OLED display, - 16 touch capacitive buttons, - RFID card / tag reader - internal temperature sensor. It contains 2 AI / DI inputs for external sensors or contacts.
| DI | |
| DI/AI | 2x DI/AI |
| DO | |
| AI | |
| AO | |
| COM | 1x CIB slave |
| SENSOR | * Temperature * RFID reader * 16 buttons, * OLED display - 128x64 px |
| COM - System buses | |
|---|---|
| CIB - Common Installation Bus (R): Installation I/O bus | 1x CIB slave |
| AI - Organization of analog inputs | |
| Total number of analog inputs | 2 |
| Number of inputs per group | 2 |
| Input type | AI / DI - combined |
| Common wire | GND terminal |
| AI - Analog Input Ranges (Group A) | |
| Parameters valid for inputs on the terminals | AI/DI1, AI/DI2 |
| Voltage | 0-2 V |
| Passive sensor | NTC Thermistor 12k / 25 °C (-40 to + 125 °C) |
| DI: Voltage-free contact | 0 when> 1.5 kOhm, 1 when <0.5 kOhm |
| DI: Balanced resistance input | 2x 1k1 (tamper/0/1/tamper) |
| Input impedance in signal range RTD | > 2,0 kΩ |
| Temperature measurement error | ± 1% of full scale |
| Resistance measurement error - maximum error at 25 ° C | ± 2% of full scale |
| Parameter des Temperatursensors | |
| Temperature - Measurement range | –20 °C ÷ +80 °C |
| Temperature - Resolution | 0,1 °C |
| Temperature - Measurement accuracy | typ. ±0,4 °C |
| RFID reader parameters | |
| Frequency | 13.56 MHz |
| RFID card type | ISO/IEC 14443B |
| Power supply | |
| Supply voltage, tolerances | 24/27 V DC from CIB bus |
| Maximum power input | 2 W |
| Module thermal/power loss | 2 W |
| Power supply from CIB - maximum current consumption (mA) | 85 mA |
| Power supply from CIB - Galvanic separation of power supply from internal circuits | No |
| Power supply from CIB - internal protection | No |
| Size and weight | |
| Weight approx. | 200 g |
| Product dimensions (width x height x depth) | 148 × 108 × 40 mm |
| Operating conditions, product standards | |
| Product standard | ČSN EN 60730-1 ed.4 :2017 (EN 60730-1:2016) -Automatic electronic control device (for household and similar purposes) |
| Protection class of electrical object | III, according to ČSN EN 61140 ed.3: 2016 (idt IEC 61140:2016) |
| IP rating (Ingress Protection) according to ČSN EN 60529: 1993 (idt IEC 529: 1989) | IP40 front, IP20 rear |
| Operating areas | Normal, acc. ČSN 33 2000-1 ed.2: 2009 (mod IEC 60354-1:2005) |
| Degree of pollution | 1, according to ČSN EN 60664-1 ed.2:2008 ( idt IEC 60664-1:2007) |
| Overvoltage category installation | II, according to EN 60664-1 ed_2: 2008 (idt IEC 60641-1: 2007) |
| Type of device | On the wall |
| Working position | Vertical |
| Type of operation (operating frequency) | Continuous |
| Ambient operating temperatures | –10 ° C to +70 ° C |
| Operating relative humidity | from 10 % up to 95 % without condensation |
| Operating atmospheric pressure | min. 70 kPa (<3,000 m above sea level) |
| Storage temperatures | –25 ° C to + 85 ° C |
| Electromagnetic compatibility, Mechanical endurance | |
| Electromagnetic compatibility / Emission | ČSN EN 55022 ed2:2007 (mod CISPR22:2005) |
| Electromagnetic compatibility / Immunity | min. according to ČSN EN 60730-1 ed.2: 2001 |
| Sinusoidal vibration endurance | 10 Hz to 57 Hz, amplitude 0,075 mm, 57 Hz to 150 Hz, acceleration 1 G (Fc test according to EN 60068-2-6: 1997 (idt IEC 68-2-6: 1995), 10 cycles per axis.) |
| Packaginng, transportation, storage | |
| Description | The module is packed in a paper box. This documentation is also part of the package. The outer packaging is carried out according to the scope of the order and the method of transport in a transport package provided with labels and other data necessary for transport. The product must not be exposed to direct weather conditions during transport and storage. Malting of the product is only allowed in clean rooms without conductive dust, aggressive gases and vapors. The most suitable storage temperature is 20 ° C |
| Installation | |
| Assembly description | The C-RC-0005R module is mounted in a vertical position with a landscape orientation in a standardized installation box with a hole spacing of 83.5 mm. The C-RC-0005R module is mounted horizontally using the mounting frame (see the following figure) either: 1) into the installation box under the Bticino plaster type 503E 106x71x52 mm and the Italtronic frame type P14001305C 2) in the installation box in plasterboard Bticino type PB503 109x68x51 and frame Italtronic type P14001305C 3) into a hole 85x56 mm in a flat panel using the set TXF 790 29 containing attachments, washers and mounting screws. Installation boxes, frames and kits are not included in the delivery, they must be ordered separately! |
| Connection | |
| Connection of power and system communication | connector with 1.5 mm2 screw terminal |
| Connection of inputs / outputs | connector with screw terminal 1.5 mm2 |
| Module connection | An example of module connection is shown in the following figure. |
| Module operation | |
| Module configuration | The module is operated, set up and diagnosed from the Mosaic development environment. |
| Commissioning | The module is operated, set and diagnosed from the MOSAIC programming environment or other parameterization software. The module is ready for operation after connecting the supply voltage and the CIB bus. The HW address is indicated on the label on the module. |
| Module diagnostics | The basic diagnostics is performed internally and the result is available in the relevant registers of the Mosaic environment. |
| Maintenance | |
| Description | The module does not require any maintenance under general installation conditions. The operations in which a part of the module has to be dismantled must always be carried out with the supply voltage disconnected. |
| Instructions | Cleaning of the glass panel is performed with means suitable for glass surfaces that do not contain any solvents. |
| Notice | Because the module contains semiconductor components, it is necessary to follow the principles for working with electrostatic sensitive components when handling the removed cover. It is not allowed to directly touch the printed circuit boards without protective measures !!! |
| Warranty | |
| Generally | Warranty and complaint conditions are governed by the Terms and Conditions of Teco a.s. |
| Notice | You must meet all the conditions of this documentation before turning on the system. The system must not be put into service unless it has been verified and confirmed that the machinery meets the requirements of Directive 89/392 / EEC, in so far as it applies to it. Documentation subject to change. |
| Основні атрибути | |
|---|---|
| Виробник | Teco |
| Країна виробник | Чехія |
| Стан | Новий |
| Користувальницькі характеристики | |
| COM | 1x CIB slave |
| DI/AI | 2x DI/AI |
| SENSOR | * Temperature * RFID reader * 16 buttons, * OLED display - 128x64 px |
- Ціна: Ціну уточнюйте